NT-M21 LED Retrofit Wattage Settings 30-40-50 or 60 Watt
Replaces HID from 50-250 Watt
The M21LED Module is a flexible and compact point source that will change the way fixtures are designed. Small footprint, easy assembly, and fewer parts will provide both the fixture manufacturer and end-user with lower cost, weight and size. Superior active cooling coupled with proprietary thermal management design ensures the M21LED Module maintains efficiency at high temperatures, color consistency and low light degradation through its rated life of 100,000Hrs. The M21LED Module allows for a smaller, more flexible fixture design, a footprint that reduces pole and installation cost as well as lower wind loading when used on poles.
Only 4.5” in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Lumiled LED’s in 3 clusters. Optional hardware includes 5 optic packages to meet any FC/distribution requirement: 25, 50, 75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high wattage HID lamps in a small footprint. Available as both retrofit and new architectural track and combo recessed fixtures.
LED chips slightly degrade over time. The M21LED Module has a sophisticated regulator circuit which maintains lumen output over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for 60,000hrs +!
Switches and Onboard Programs
The M21LED Module is preloaded with helpful programs designed to allow the customer to optimize each application with the flick of a switch.
STD
The default setting unit is on all the time
561 energy saver program (sav)
When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation, dimming 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful program saves 3 hours of operation per night over 1100 hours per year!
Dimm Sink (default)
This selection becomes handy when using a motion sensor or dimming switch. Sink means that you are using a dimming ballast or controller that provides the 10 v power and the control device adjusts the voltage for your needs. Most control devices are Sinking so if you do not know default to this switch setting.
Dimm Source
This is selected when the control device is providing the 0-10v power. Theatrical lighting and some large dimming panels provide the 0-10v power.
Future Proof Module
As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire manufacturers to plan and design new luminaire ranges for the coming years.
Benefits
- New Lumen Maintenance Circuit
- Increased efficacies
- Color consistency increased
- Dimming options include 0-10V, Wireless
- Rated Life 100,000Hrs
- High Lumen Output
- Substantial energy savings
- Enables Intelligent controls and networking
- Small Footprint-4.50”
Applications
- Offices (areas such as hallways, receptions, boardrooms, etc.)
- Hotel lobbies and receptions areas. School recessed, wall packs, Hospitals
- Retail high-end shops
- Commercial/Industrial Interior Space (warehouse, garage)
- Commercial/Industrial Exterior Space (parking lots, streets, roadways)
Additional protection
- 24V Line Voltage Variation regulation
- Under Voltage Protection 21v Minimum
- Over Voltage Protection 30V shut off
- Reset 27V or lower
- Over Temp-thermistor-90C shut off
- Below 85C turns back on
END USER MODULE ADAPTERS AND FIXTURES
The M21LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings. It is available in new Track and Recessed fixtures.